(edited by Antonio Becchi)
From: Becchi A., I criteri di plasticità (1864-1964), PhD Thesis, Firenze 1994
Musschenbroek p. van, Dissertationes physicae experimentales et geometricae, Leida.
Coulomb C.A., Essai sur une application des règles de Maximis et Minimis ..., Mémoires de Math. et Phys. (1776), 343-382.
Delanges P., Statica e meccanica de' semifluidi, Memorie di Matematica e Fisica della Soc. Italiana, 4, 329-368.
Girard P.S., Traité analytique de la résistance des solides et des solides d'égale résistance, Paris.
Cauchy A., Recherches sur l'équilibre et le mouvement des corps solides ou fluides, élastiques ou non élastiques, (1822), Bull. des Sci. Soc. Phil. Paris, 9-13.
Navier L., Sur les lois de l'équilibre et du mouvement des corps solides élastiques, Bull. Sci. Soc. Phil. Paris, 177-181.
Cauchy A., De la pression dans les fluides, Ex. de Math., 2, 23-24.
Cauchy A., De la pression ou tension dans un corps solide, Ex. de Math., 2, 42-56; Addition, 57-59.
Cauchy A., Sur la condensation et la dilatation des corps solides, Ex. de Math., 2, 60-69.
Cauchy A., Sur les relations qui existent, dans l'état d'équilibre d'un corps solide ou fluide, entre les pressions ou tensions et les forces accélératrices, Ex. de Math., 2, 108-111.
Cauchy A., Sur les équations qui expriment les conditions d'équilibre ou les lois du mouvement intérieur d'un corps solide, élastique, ou non élastique, Ex. de Math., 3, 160-187.
Cauchy A., Sur l'équilibre et le mouvement d'un système de points matériels sollicités par des forces d'attractions ou de répulsions mutuelle, Ex. de Math., 3, 188-212.
Cauchy A., De la pression ou tension dans un système de points matériels, Ex. de Math., 3, 213-236.
Cauchy A., Sur l'équilibre et le mouvement intérieur des corps considérés comme des masses continues, Ex. de Math., 4, 293-319.
Poisson S.D., Mémoire sur l'équilibre et le mouvement des corps solides élastiques et des fluides, Ann. de Chi. et de Phys., 42, 145-171.
Poncelet J.V., Introduction à la mécanique industrielle, physique et expérimentale, Metz.
Saint-Venant B. de, Sur la définition de la pression dans les corps fluides ou solides en repos ou en mouvement, L'Institut, n. 524, 12-13.
Saint-Venant B. de, Note sur la pression dans l'intérieur des corps ou à leurs surfaces de séparation, Comptes Rendus, 21, 2^sem., 24-26.
Stokes G.G., On the theories of internal friction of fluids in motion, and of the equilibrium and motion of elastic solids, in Mathematical and Physical Papers, 1, Cambridge, 1880.
Haughton S., On the Laws of Equilibrium and Motion of Solid and Fluid Bodies, Cambridge and Dublin Mathematical Journal, 1, 173-182; versione riveduta in Trans. Roy. Irish Acad., 21, 1849, 151-198.
Hopkins W., On the internal pressure to which rock masses may be subjected, and its possible influence in the production of the laminated structures, Cambridge Phil. Trans., 7, 1849, 456-470.
Saint-Venant B. de, Sur la théorie de la résistance des fluides. Solution du paradoxe proposé à ce sujet par d'Alembert aux géomètres. Comparaison de la théorie aux expériences, Comptes Rendus, 24 (estratto).
Weisbach J., Die Theorie der zusammengesetzten Festigkeit, Der Ingenieur, 1, 252-265.
Haughton S., On a classification of elastic media, and the laws of plane waves propagated through them, Trans. Roy. Irish Acad., 22, Part 1, 97-138.
Maxwell J.C., Draft of paper “On the equilibrium of elastic solids”, (Autunno 1849-Primavera 1850), in The scientific letters and papers of J.C. Maxwell, 1 (1846-1862), Cambridge Univ. Press, 1990, 133-182.
Jellet J.H., On the equilibrium and motion of an elastic solid, Trans. Roy. Irish Acad., 22, Part 3, 179-217.
Maxwell J.C., Abstract of paper “On the equilibrium of elastic solids”, in The scientific letters and papers of J.C. Maxwell, 1 (1846-1862), Cambridge Univ. Press, 1990, 184-185.
Rankine W.J.M., On the vibrations of plane-polarised light, (1850), in Miscellaneous Scientific Papers, London 1881, 150 e ssgg.
Rankine W.J.M., Laws of the elasticity of solid bodies, (1850), The Cambridge and Dublin Math. Journ., 6, 1851, 47-80 e 178-181.
Rankine W.J.M., The centrifugal theory of elasticity and its connection with the theory of heat, in Miscellaneous Scientific Papers, London 1881.
Maxwell J.C., Letter to William Thomson, 17 dicembre 1856, in The Scientific Letters and Papers of J.C.Maxwell, 1, Cambridge Univ. Press, 1990, 482-491.
Rankine W.J.M., A Manual of Applied Mechanics, London.
Neumann C., Zur Theorie der Elasticität, J. reine angew. Math., 57, 281-318.
Clebsch A., Theorie der Elasticität fester Körper, Leipzig.
Saint-Venant B. de, Lettera a G.G.Stokes del 22 gennaio 1862, in Memoirs and scientific correspondence, 1, Cambridge, 1907, 156-159.
Saint-Venant B. de, Mémoire sur la distribution des élasticités autour de chaque point..., J. Math. Pures et Appl., 8, 257-295; 353-430.
Saint-Venant B. de, [NAVIER, L.], Résumé des Leçons données à l'Ecole des Ponts et Chaussées sur l'application de la Mécanique à l'établissement des constructions et des machines, avec des Notes et des Appendices par M.Barré de Saint-Venant, Paris.
Tresca H., Mémoire sur l'écoulement des corps solides soumis à de fortes pressions, Comptes Rendus, 59, 754-758.
Thomson W., On the elasticity and viscosity of metals, Proc. Roy. Soc. London, 14, 289-297.
Tresca H., Experiments on the production of cylinders of ice by pressure through orifices, Phil. Mag., 30, 239-240.
Kleitz C., Sur les forces moléculaires dans les liquides en mouvement, avec application à l'hydrodynamique, Comptes Rendus, 63, 2^sem., 988-99.
Maxwell J.C., On the dynamical Theory of gases, in Scientific Papers, II, London 1890, 26-78.
Thomson W., Tait P.G., Treatise on Natural Philosophy, Oxford; analogia idrodinamica all'Art. 705.
Tresca H., Mémoire sur l'écoulement des corps solides, Mém. pres. par div. Savants, 18, 733-799.
Tresca H., Mémoire sur le poinçonnage et la théorie mécanique de la déformation des métaux, Comptes Rendus, 68, 1197-1201.
Lévy M., Mémoire sur les équations générales des mouvements intérieurs des corps solides ductiles au delà des limites où l'élasticité pourrait les ramener à leur premier état, (extrait), Comptes Rendus, 70, 1323-1325.
Morin (rapporteur), Rapport sur le mémoire présenté à l'Académie le 29 mai 1869 par M. Tresca, sur le poinçonnage et sur la théorie mécanique de la déformation des corps solides, Comptes Rendus, 70, 288-308.
Saint-Venant B. de, Preuve théorique de l'égalité des deux coefficients de résistance au cisaillement et à l'extension ou à la compression dans le mouvement continu de déformation des solides ductiles au delà des limites de leur élasticité, Comptes Rendus, 70, 309-311.
Saint-Venant B. de, (rapporteur), Rapport sur un complément présenté par M.Tresca le 7 février 1870 à son mémoire du 27 novembre 1864 relatif à l'écoulement des corps solides malléables poussés hors d'un vase cylindrique par un orifice circulaire, Comptes Rendus, 70, 368-369.
Saint-Venant B. de, Sur l'établissement des équations des mouvements intérieurs opérés dans les corps solides ductiles au delà des limites où l'élasticité pourrait les ramener à leur prémier état, Comptes Rendus, 70, 473.
Tresca H., Mémoire sur le poinçonnage des métaux et des matières plastiques, Comptes Rendus, 70, 27-31.
Boussinesq J., Etude nouvelle sur l'équilibre et le mouvement des corps solides élastiques dont certaines dimensions sont très-petites par rapport à d'autres, J. de Math., 2^ser., 16, 125-274.
Lévy M., Extrait du mémoire sur les équations générales..., J. de Math., 2^ser., 16, 369-372.
Lévy M., Sur l'intégration des équations aux différences partielles, relatives aux mouvements intérieur des corps solides ductiles, lorsque ces mouvements ont lieu par plans parallèles, Comptes Rendus, 73, 1098-1103.
Saint-Venant B. de, Complément aux mémoires du 7 mars 1870 de M. de Saint-Venant et du 19 juin 1870 de M. Lévy, sur les Equations différentielles indéfinies du mouvement intérieur des solides ductiles, etc.; - Equations définies ou relatives aux limites de ces corps; - Applications, J. de Math., 16, 373-382.
Saint-Venant B. de, (rapporteur), Rapport sur un mémoire de M.Lévy, relatif aux équations générales du mouvement intérieur des corps solides ductiles, au delà des limites où l'élasticité pourrait les ramener à leur premier état, Comptes Rendus, 73, 86-91.
Saint-Venant B. de, Sur la mécanique des corps ductiles, Comptes Rendus, 73, 1181-1184.
Tresca H., Etude sur la torsion prolongée au delà de la limite d'élasticité, Comptes Rendus, 73, 1104-1105.
Boussinesq J., Lois géométriques de la distribution des pressions, dans un solide homogène et ductile soumis à des déformations planes, Comptes Rendus, 74, 242-246.
Boussinesq J., Sur l'intégration de l'équation aux dérivées partielles des cylindres isostatiques produits dans un solides homogène et ductile, Comptes Rendus, 74, 318-321.
Boussinesq J., Equations aux dérivées partielles des vitesses, dans un solide honogène et ductile déformé parallélement à un plan, Comptes Rendus, 74, 450-453.
Saint-Venant B. de, Sur un complément à donner à une des équations présentees par M.Lévy pour les mouvements plastiques qui sont symétriques autour d'un même axe, Comptes Rendus, 74, 1083-1087.
Saint-Venant B. de, Mémoire sur l'hydrodynamique des cours d'eau, Comptes Rendus, 74.
Tresca H., Rapport sur un mémoire de M. Kleitz intitulé: “Etudes sur les forces moléculaires dans les liquides en mouvement, et application à l'hydrodynamique”, Comptes Rendus, 74, 1^sem., 426-438.
Tresca H., Sur l'intensité des forces capables de déformer, avec continuité, des blocs ductiles, cylindriques, pleins ou évidés, et placés dans diverses circonstances, Comptes Rendus, 74, 1009-1015.
Kleitz C., Etudes sur les forces moléculaires dans les liquides en mouvement et application à l'hydrodynamique, Paris 1873.
Lipschitz R., Sätze aus dem Grenzgebiet der Mechanik und der Geometrie, Math. Annalen, 6, 416-435.
Lipschitz R., Beweis eines Satzes der Elasticitätslehre, J. reine und angew. Math., 78, 329-337.
Maxwell J.C., Über Doppelbrechung in einer bewegten zähen Flüssigkeit, An. Phys. und Chemie, 1, 6^Reihe, 151-154.
Meyer O.E., Theorie der elastischen Nachwirkung, Ann. Phys. und Chemie, 1, 6^Reihe, 108-119.
Maxwell C., Lettera a G.G.Stokes del 25 settembre 1875, in Memoirs and scientific correspondence, 1, Cambridge, 1907, 36-37.
Meyer O.E., Zur Theorie der inneren Reibung, J. reine und angew. Math., 78, 130-135.
Saint-Venant B. de, De la suite qu'il serait nécessaire de donner aux recherches expérimentales de Plasticodynamique, Comptes Rendus, 81, 115-121.
Maxwell J.C., Constitution of Bodies, in Encycl. Britannica, 9^Ed., 310; anche The Scientific Papers of J.C.Maxwell, 2, Cambridge 1890, 616-624.
Lamb H., Hydromechanics, (1^Ed. 1879), Cambridge Univ. Press, 1932 (6^Ed.).
Castigliano A., Théorie de l'équilibre des systèmes élastiques, Torino.
Saint-Venant B. de, Géometrie cinématique. Sur celle des déformations des corps soit élastique, soit plastique, soit fluides, Comptes Rendus, 90, 53-56.
Beltrami E., Sulle equazioni generali dell'elasticità, (1880-1882), in Opere Matematiche, 3, 383-407.
Clebsch A., Théorie de l'élasticité des corps solides, traduite par MM. Barré de Saint-Venant et Flamant, avec des Notes étendues de M. de Saint-Venant, Paris.
Beltrami E., Sulle condizioni di resistenza dei corpi elastici, Rend. Reale Ist. Lom., 18, 2^ser., 704-714.
Fischer H., Beitrag zur mechanischen Untersuchung plastischer Körper, Der Civilingenieur, 31, 482-500.
Lévy M., Discours prononcé aux obsèques de M. Tresca, Comptes Rendus, 100, 1610-1614.
Neumann F., Vorlesungen über die Theorie der Elasticität der festen Körper und des Lichtäthers, Berlin, 1885.
Reynolds O., On the Dilatancy of Media composed of Rigid Particles in Contact, Phil. Mag., 20, n. 127, 469-481.
Saint-Venant B. de, Sur le but théorique des principaux travaux de H. Tresca, Comptes Rendus, 101, 119-122.
Todhunter P., Pearson K., A History of the Theory of Elasticity and of the Strength of Materials, vol. 1, Cambridge Univ. Press.
Ibbetson W.J., An elementary treatise on the mathematical theory of perfectly elastic solids, with a short account of viscous fluids, Macmillan, London.
Barus C., Maxwell's Theory of the Viscosity of Solids and its Physical Verification, Phil. Mag., (5), 26, 183-217.
Basset A.B., A Treatise on Hydrodynamics, 2 voll., Cambridge.
Crotti F., La teoria dell'elasticità, Hoepli, 1888.
Anonima recensione al primo volume della History of the Theory of Elasticity and of the Strength of Materials di Todhunter e Pearson, in Bull. Sci. Math., 12, 38-40.
Philips M., Congrès International de Mécanique appliquée, Comptes Rendus, 109, 491-492.
Brillouin M., Principes généraux d'une théorie élastique de la plasticité et de la fragilité des corps solides, Ann. Ecole Normale Sup., III série, 7, 345-360.
Duhem P., Hydrodynamique, elasticité, acoustique, (Cours professé en 1890-'91), Hermann, Paris.
Faurie G., Sur les lois de l'écrouissage et des déformations permanentes, Comptes Rendus, 113, 349-350.
Love A.E.H., A treatise on the mathematical theory of elasticity, Cambridge, (1892-'93).
Thomson W., On the elasticity of a crystal according to Boscovich, Proc. Roy. Soc. London, 54 B, 59-75.
Todhunter P., Pearson K., A History of the Theory of Elasticity..., vol. II, Cambridge Univ. Press.
Bach C., Elasticität und Festigkeit, Berlin.
Fremont C., Théorie expérimentale du cisaillement et du poinçonnage des métaux, Comptes Rendus, 119, 998-1003.
Voigt W., Beobachtungen über die Festigkeit bei homogener Deformation, Annalen der Physik und Chemie, 53, 43-56, (già in Gött. Nachr., n.13, p. 521, 1893).
Faurie G., Sur les variations de l'écrouissage des métaux, Comptes Rendus, 120, 1407-1413.
Faurie G., Sur les déformations permanentes et la rupture des corps solides, Comptes Rendus, 121, 343-345.
Mehmke R., Zum Gesetz der elastischen Dehnungen, Zeits. Math. Phys., 42, 327-338.
Voigt W., Beobachtungen über Festigkeit bei homogener Deformation, angestellt von L. Januszkiewicz, Annalen der Physik und Chemie, 67, 452-458.
Guest J.J., On the Strength of Ductile Materials under Combined Stress, Phil. Mag., 50, 69-132.
Schwedoff T., Die Starrheit der Flüssigkeiten, Phys. Zeits., 1, 552-554; resoconto di S. Oppenheimer della relazione tenuta dall'autore al Congresso Internazionale di Fisica (Parigi, 1900).
Voigt W., Der gegenwärtige Stand unserer Kenntnisse der Kristallelasticität, (Referat für den internationalen physikalischen Congreß in Paris vom 6. bis 12. August 1900, Nachr. K. Gesell. Wiss. Gö; 117-176.
Volterra V., Betti, Brioschi, Casorati, trois analystes italiens et trois manières d'envisager les questions d'analyse, Conferenza tenuta il 6 agosto 1900 nella seduta d'apertura del II Congresso internazionale dei Matematici, Parigi (estratto), 1-15.
Natanson L., Sur les lois de la viscosité, Bull. Acad. Sci. de Cracovie, 95-111.
Natanson L., Sur la double réfraction accidentelle dans les liquides, Bull. Acad. Sci. de Cracovie, 161-171.
Natanson L., Sur les lois de la diffusion, Bull. Acad. Sci. de Cracovie, 335-348.
Voigt W., Zur Festigkeitslehre, Annalen der Phys., IV Folge, 4 (estratto).
Voigt W., Über das numerische Verhältnis der beiden Elasticitätsconstanten isotroper Medien nach der molecularer Theorie, Annalen der Phys., IV Folge, 4 (estratto).
Weingarten G., Sulle superficie di discontinuità nella teoria della elasticità dei corpi solidi, Rend. R. Acc. Lincei, 10, ser. V, 1° sem., 57- 60.
Helmholtz H. von, Dynamik continuirlich verbreiteter Massen, Leipzig.
Natanson L., Sur la propagation d'un mouvement dans un fluide visqueux, Bull. Int. Acad. Sci. de Cracovie, 19-35.
Duhem P., L'évolution de la Mécanique, Paris.
Natanson L., Sur l'application des équations de Lagrange dans la théorie de la viscosité, Bull. Acad. Sci. de Cracovie, 268-283.
Natanson L., Sur l'approximation de certaines équations de la théorie de la viscosité, Bull. Acad. Sci. de Cracovie, 283-311.
Natanson L., Remarques sur la théorie de la relaxation, Bull. Acad. Sci. de Cracovie, 767-787.
Zaremba S., Remarques sur les travaux de M. Natanson relatifs à la théorie de la viscosité, Bull. Int. Acad. Sci. de Cracovie, 85-93.
Zaremba S., Sur une généralisation de la théorie classique de la viscosité, Bull. Acad. Sci. de Cracovie, 380-402.
Zaremba S., Sur un problème d'hydrodynamique lié à un cas de double réfraction accidentelle dans les liquides et sur les considérations théoriques de M. Natanson relatives à ces phénomène, Bull. Acad. Sci. de Cracovie, 403-422.
Zaremba S., Le principe des mouvements relatifs et les équations de la mécanique physique. Réponse à M. Natanson, Bull. Acad. Sci. de Cracovie, 614-621.
Huber M.T., Il lavoro specifico di deformazione come misura dello sforzo del materiale (testo in polacco),Czasopisme Techniczne (Periodico tecnico), Lwow; anche PISMA, II, Varsavia 1956, 3-20.
Volterra V., Un teorema sulla teoria della elasticità, Rend. R. Acc. Lincei, 14, ser. V, 1° sem., 127- 137.
Volterra V., Sull'equilibrio dei corpi elastici più volte connessi, Rend. R. Acc. Lincei, 14, ser. V, 1° sem., 193-202.
Volterra V., Sull'equilibrio dei corpi elastici molteplicemente connessi, Nuovo Cimento, (5), X e XI.
Volterra V., Sulle distorsioni dei solidi elastici più volte connessi, Rend. R. Acc. Lincei, 14, ser. V, 1° sem., 351-356.
Volterra V., Sulle distorsioni dei corpi elastici simmetrici,Rend. R. Acc. Lincei, 14, ser. V, 1° sem., 431-438.
Volterra V., Contributo allo studio delle distorsioni dei solidi elastici,Rend. R. Acc. Lincei, 14, ser. V, 1° sem., 641-654.
Scoble W.A., The Strength and Behavior of Ductile Materials under Combined Stress, Phil. Mag., 12, 533-547.
Volterra V., Sur l'équilibre des corps élastiques multiplement connexes, Ann. Ecole Normale, 24, 401-517.
Haar A., Kármán T. von, Zur Theorie der Spannungszustände in plastischen und sandartigen Medien, Nachr. K. Gesell. Wiss. Gö., 204-218.
Hamel G., Über die Grundlagen der Mechanik, Math. Annalen, 66, 350-397.
Ludwik P., Elemente der technologischen Mechanik, Springer, Berlin.
Scoble W.A., Ductile materials under combined stress, Phil. Mag., 19, 6^ser., 116-128; 908-916.
Jaumann G., Geschlossenes System physikalischer und chemischer Differentialgesetze, Akad. Wiss. Wien Sitzber., (II a), 120, 385-530.
Mises R. von, Mechanik der festen Körper im plastisch-deformablen Zustand, Nachr. K. Gesell. Wiss. Gö., 582-592.
Forchheimer P., Hydraulik, Berlin, 1914.
Somigliana C., Sulla teoria delle distorsioni elastiche. Nota I, Rend. R. Acc. Lincei, 23, ser. V, 1° sem., 463-472.
Somigliana C., Sulla teoria delle distorsioni elastiche. Nota II, Rend. R. Acc. Lincei, 24, ser. V, 1° sem., 655-666.
Colonnetti G., Su certi stati di coazione elastica che non dipendono da azioni esterne, Rend. R. Acc. Lincei, 26, ser. V, 2° sem., 43-47.
Maggi A., Posizione e soluzione di alcune questioni attinenti alla teoria delle distorsioni elastiche, Rend. Acc. Lincei, ser. V, 26, 1^sem., 350-357.
Colonnetti G., Su di una particolare classe di coazioni elastiche che si incontra nello studio della resistenza delle artiglierie, Rend. Acc. Lincei, ser. V, 27, 112-117.
Colonnetti G., Una proprietà caratteristica delle coazioni elastiche nei solidi elasticamente omogenei, Rend. Acc. Lincei, ser. V, 27, 155-158.
Colonnetti G., Sul problema delle coazioni elastiche, Rend. Acc. Lincei, ser. V, 27, Nota I: 257-270; Nota II: 331-335.
Colonnetti G., Applicazione a problemi tecnici di un nuovo teorema sulle coazioni elastiche, Atti R. Acc. Sci., Torino, 54, 69-83 (41-55 a seconda della numerazione).
Jaumann G., Physik der kontinuierlichen Medien, Denks. Akad. Wiss. Wien, 95, 461-562.
Bouasse H., Théorie de l'élasticité. Résistance des matériaux, Librairie Delagrave, Paris.
Brillouin M., Théorie de la plasticité et de la fragilité des solides isotropes, Annales Phys., 9^ser., 13, 217-235.
Brillouin M., La théorie de Tresca - Saint-Venant, Annales Phys., 9^ser., 14, 75-112.
Föppl A., Föppl L., Drang und Zwang. Eine höhere Festigkeits-ehre für Ingenieure, München.
Haigh B.P., The strain energy function and the elastic limit, Engineering, 109, 158-160.
Prandtl L., Über die Härte plastischer Körper, Nachr. K. Wiss. Gö., 74-85.
Griffith A.A., The phenomena of rupture and flow in solids, Phil. Trans. (A), 221, 163-198.
Mises R. von, Über die Aufgaben und Ziele der angewandten Mathematik, Zeitschrift für angewandte Mathematik und Mechanik, 1, 1-15.
Mises R. Von, Über die gegenwärtige Krise der Mechanik, Zeitschrift für angewandte Mathematik und Mechanik, 1, 425-431.
Prandtl L., Über die Eindringungsfestigkeit (Härte) plastischer Baustoffe und die Festigkeit von Schneiden, Zeitschrift für angewandte Mathematik und Mechanik, 1, 15-28.
Sanden K. von, Die Energiegrenze der Elastizität nach Huber und Haigh im Vergleich zu den älteren Dehnungs- und Schubspannunstheorien, Werft und Reederei, 2, Heft 8, 217-218.
Honegger E., Das Verhalten mechanisch beanspruchter Metalle, BBC Mitteilungen, 9, 25-35; 223-234.
Hencky H., Über einige statisch bestimmte Fälle des Gleichgewichts in plastischen Körpern, Zeitschrift für angewandte Mathematik und Mechanik, 3, 241-251.
Prandtl L., Anwendungsbeispiele zu einem Henckyschen Satz über das plastische Gleichgewicht, Zeitschrift für angewandte Mathematik und Mechanik, 3, 401-406.
Hencky H., Zur Theorie plastischer Deformationen und der hierdurch im Material hervorgerufenen Nachspannungen, Zeitschrift für angewandte Mathematik und Mechanik, 4, 323-334.
Hencky H., Zur Theorie plastischer Deformationen und der hierdurch im Material hervorgerufenen Nebenspannungen, Proc. 1^ Int. Congr. Appl. Mech. (Delft), 312-316.
Heymans P., Note on a property of rectilinear lines of principal stress, J. Math. and Phys., 3, 182-185.
Schmid E., Yield point of a crystals, critical shear stress law, Proc. 1^ Int. Congr. Appl. Mech. (Delft), 342.
Prandtl L., Spannungsverteilung in plastischen Körper, Proc. 1^ Int. Congr. Appl. Mech. (Delft), 43-54.
Brillouin M., Essai théorique sur la plasticité des solides, Annales Phys., 3, 10^ser., 129-144.
Brillouin L., Les lois de l'élasticité sous forme tensorielle valable pour des coordonnées quelconques, Annales Phys., 3, 10^ ser., 251-298.
Hencky H., Über das Wesen der plastischen Verformung. II. Das Strömen plastischer Massen und der Arbeitsverlust beim Schmiede- und Walzvorgang, VDI-Zeits., 69, 695-696; 1253-1254.
Lode W., Versuche über den Einfluss der mittleren Hauptspannung auf die Fliessgrenze, Zeitschrift für angewandte Mathematik und Mechanik, 5, 142-145.
Mises R. von, Bemerkungen zur Formulierung des mathe-matischen Problems der Plastizitätstheorie, Zeitschrift für angewandte Mathematik und Mechanik, 5, 147-149.
Nadai A., Neue Beiträge zum ebenen Problem der Plastizität, Zeitschrift für angewandte Mathematik und Mechanik, 5, 141-142.
Schleicher F., Die Energiegrenze der Elastizität (Plastizitätsbedingung), Zeitschrift für angewandte Mathematik und Mechanik, 5, 478-479.
Becker R., Über Plastizität, Verfestigung und Rekristallisation, Zeits. techn. Phys., 7, 547-555.
Bridgman P.W., Some Mechanical Properties of Matter under High Pressure, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 53-61.
Debye P., Molekulare Kräfte und ihre Deutung, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 33-45.
Elam C.F., Some Properties of Gold, Silver and Copper Crystals, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 258-259.
Göler F., Festigkeitseigenschaften von Metallkristallen, Zeits. techn. Phys., 8, 132-141.
Kármán T. von, Über elastische Grenzzustände, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 23-32.
Lode W., Versuche über den Einfluss der mittleren Hauptspannung auf das Fliessen der Metalle Eisen, Kupfer und Nickel, Zeits. Phys., 36, 913-939.
Nadai A., Versuche über die Fliessgrenze des Eisens, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 336-341.
Ono A., Zum Gleitwiderstande des Kristalls, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 247-250.
Ros M., Eichinger A., Versuche zur Klärung der Frage der Bruchgefahr, Proc. 2^Int. Congr. Appl. Mech., 315-325; 325-327.
Sachs G., Beitrag zum Härteproblem, Proc. 2^Int. Congr. Appl. Mech., 266-271.
Schleicher F., Der Spannungszustand an der Fliessgrenze (Plastizitätsbedingung), Zeitschrift für angewandte Mathematik und Mechanik, 6, 199-216.
Schmid E., Zur quantitativen Beschreibung der plastischen Ein-kristallendehnung, Proc. 2^Int. Congr. Appl. Mech., 251-257.
Smekal A., Zur Molekulartheorie der Festigkeit und der Verfestigung, Zeits. techn. Phys., 7, 535-544.
Taylor G.I., The Distortion of Single Crystals of Metals, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 46-52.
Weissenberg K., Die geometrische Strukturtheorie der Materie, Proc. 2^Int. Congr. Appl. Mech. (Zürich), 243-246.
Love A.E.H., A Treatise on the Mathematical Theory of Elasticity, Cambridge.
Nadai A., Der bildsame Zustand der Werkstoffe, Berlin.
Hencky H., Über die Form des Elastizitätsgesetzes bei ideal elastischen Stoffen, Zeits. techn. Phys., 9, 215-220; 457.
Krall G., Limiti superiori del cimento dinamico, Rend. Acc. Naz. Lincei, cl. Sci. Fis. Mat., 7, 223-228.
Lode W., Der Einfluss der mittleren Hauptspannung auf das Fliessen der Metalle, VDI-Zeits., 72, 733.
Mises R. von, Mechanik der plastischen Formänderung von Kristallen, Zeitschrift für angewandte Mathematik und Mechanik, 8, 161-185.
Murnaghan F.D., On the Energy of Deformation of an Elastic Solid, Proc. Nat. Acad. Sci., 14, 889-891.
Nadai A., Plastizität und Erddruck, Handbuch der Phys., VI, 428-50.
Sachs G., Zur Ableitung einer Flissbedingung, VDI-Zeits. , 72, 734-736.
Smekal A., Die molekulartheoretischen Grundlagen der Festig-keitseigenschaften des Werkstoffkornes. Sichtbarmachung molekularer Höchstspannung in verformten Kristallen, VDI-Zeits., 72, 667-673.
Takaba I., Okuda K., Die theorie der Fliessfiguren, Archiv Eisen-hüttenwesen, 1, 511.
Burzynski W. von, Über die Anstrengungshypothesen, Schweizerische Bauzeitung, 94, 259-262.
Hencky H., Das Superpositiongesetz eines endlich deformierten relaxationsfähigen elastischen Kontinuums und seine Bedeutung für eine exakte Ableitung der Gleichungen für die zähe Flüssigkeit in der Eulerschen Form, Annalen Phys., 2, 617-629.
Hencky H., Welche Umstände bedingen die Verfestigung bei der bildsamen Verformung von festen isotropen Körpern, Zeits. Phys., 55, 145-155.
Lichtenstein L., Grundlagen der Hydromechanik, Berlin.
Reuss A., Berechnung der Fliessgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle, Zeitschrift für angewandte Mathematik und Mechanik, 9, 49-58.
Geiringer-Pollaczek H., Beitrag zum vollständigen ebenen Plastizitätsproblem, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 185-190.
Mises R. von, Über die bisherigen Ansätze in der klassischen Mechanik der Kontinua, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 4-11.
Nadai A., Zur Theorie plastischer Zustände, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 191-196.
Persu A., Irreführende Anschauungen in den Grundlagen der Mechanik, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 468-47.
Reiner M., Die Plasticodynamik weicher Stoffe, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 197.
Reuss A., Berücksichtigung der elastischen Formänderung in der Plastizitätstheorie, Zeitschrift für angewandte Mathematik und Mechanik, 10, 266-274.
Sadowski M., Das nichtanalytische elastische Potential. Theorie und Beispiele, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 452-454.
Sandel G.D., Die Anstrengunsfrage, Schweizerische Bauzeitung, 95, 335-338.
Sandel G.D., Über die Anstrengungshypothesen, Schweizerische Bauzeitung, 95, 87; 123.
Tafel W., Meine Arbeiten über die plastische Verformung und den Fliessverfestigungs- und Bruchvorgang beim Zerreissversuch, Proc. 3^Int. Congr. Appl. Mech. (Stoccolma), 214-222.
Nadai A., Plasticity, New York, 1931.
Weissenberg K., Die Mechanik deformierbarer Körper, Abh. Akad. Wiss., n.2, Berlin.
Eisenschitz R., Die Viskosität von suspensionen lang-gestreckter Teilchen und ihre Interpretation durch Raumbeanspruchung, Zeits. physikalische Chemie, (A), 158, 78-90.
Reuss A., Fliesspotential oder Gleitebenen ?, Zeitschrift für angewandte Mathematik und Mechanik, 12, 1932.
Schmidt R., Über den Zusammenhang von Spannungen und Formänderungen im Verfestigungsgebiet, Ing.-Arch., 3, 215-235.
Fromm H., Stoffgesetze des isotropen Kontinuums, insbesondere bei zähplastischem Verhalten, Ingeniuer-Archiv, 4, 432-466.
Odqvist F.K.G., Die Verfestigung von flusseisenänlichen Körpern, Zeitschrift für angewandte Mathematik und Mechanik, 13, 360-363.
Prandtl L., Ein Gedankenmodell für den Zerreissvorgang spröderr Körper, Zeitschrift für angewandte Mathematik und Mechanik, 13, 129-133.
Reuss A., Vereinfachte Berechnung der plastischen Form-änderungsgeschwindigkeiten bei Voraussetzung der Schubspannungs-fliessbedingung, Zeitschrift für angewandte Mathematik und Mechanik, 13, 356-360.
Thompson J.H.C., On the theory of visco-elasticity: a thermo-dynamical treatment of visco-elasticity, and some problems of the vibrations of visco-elastic solids, Phil. Trans. Roy. Soc. London, (A), 231, 339-407; 355 e 359 note sulla plasticità.
Caquot A., Définition du domaine élastique dans les corps isotropes. Courbes intrinsèques de résistance élastique apparente, et de résistance élastique vrai (endurance), Proc. 4^Int. Congr. Appl. Mech. , 24-35.
Fromm H., Stoffgesetze des zäh- plastischen, isotropen Kontinuums, Proc. 4^Int. Congr. Appl. Mech. , 182-184.
Jürgenson L., On application of theories of elasticity and plasticity to foundation problems, Proc. 4^Int. Congr. Appl. Mech., 199.
Leon A., Über die Verbindung von Trenn- und Schubbruch, Proc. 4^Int. Congr. Appl. Mech. , 211.
Orowan E., Zur Kristallplastizität, Zeits. für Physik, 89, Teil I: 605-613; Teil II: 614-633; Teil III: 634-659.
Polanyi M., Über eine Art Gitterstörung, die einen Kristall plastisch machen könnte, Zeits. für Physik, 89, 660-664.
Taylor G.I., The Strength of Crystals of Pure Metals and of Rock Salt, Proc. 4^Int. Congr. Appl. Mech., 113-125.
Taylor G.I., The mechanisms of plastic deformation of crystals, Proc. Roy. Soc. London, (A), 145, 362.
Geiringer H., Fondements mathématiques de la théorie des corps plastiques isotropes, Mémorial des Sciences Math., fasc. 86.
Murnaghan F.D., Finite deformation of an elastic solid, Amer. J. Math., 59, 235-260.
Prager W., Mécanique des solides isotropes au delà du domaine élastique, Mémorial des Sciences Math., fasc. 87.
Zaremba S., Sur une conception nouvelle des forces intérieures dans un fluide en mouvement, Mémorial des Sciences Math., fasc. 82.
Peretti G., Dissipazioni di energia nei mezzi plastici, Rend. Ist. Lom., 70, 93-100.
Biot M.A., Theory of elasticity with large displacements and rotations, Proc. 5^Int. Congr. Appl. Mech., 117-122.
Colonnetti G., De l'équilibre des systèmes élastiques dans lesquels se produisent des deformations plastiques, J. Math. Pures et Appl., ser. IX, 17, 233-235.
Colonnetti G., De l'équilibre des systèmes élastiques dans lesquels se produisent des déformations plastiques, J. Math. Pures et Appl., IX sér., 17, 233-255.
Cross H., The relation of structural mechanics to structural engineering, Proc. 5^Int. Congr. Appl. Mech., 1-8.
Körber F., Das Verhalten metallischer Werkstoffe im Bereich kleiner Verformungen, Proc. 5^Int. Congr. Appl. Mech., 20-33.
Melan E., Zur Plastizität des räumlichen Kontinuums, Ing.-Arch., 9, 116-126.
Peres J., Les methodes d'analogie en mécanique appliquée, Proc. 5^ Int. Congr. Appl. Mech., 9-19.
Prager W., On isotropic materials with continuous transition from elastic to plastic state, Proc. 5^Int. Congr. Appl. Mech., 234-237.
Reiner M., Freundenthal A., Failure of a Material showing Creep (a dynamical theory of strength), Proc. 5^Int. Congr. Appl. Mech., 228-233.
Rendulic L., Eine Betrachtung zur Frage der plastischen Grenzzustände, Der Bauingenieur, 19, 913-916.
Taylor G.I., Plastic Strain in Metals, J. Inst. Metals, 62, 307-324.
Kappus R., Zur Elastizitätstheorie endlicher Verschiebungen, Zeitschrift für angewandte Mathematik und Mechanik, 19, 271-285; 344-361.
Signorini A., Valori medi delle caratteristiche dello stress in stereodinamica, Rend. Acc. Lincei, 29, 6^ser., 1^sem., fasc. 10 (estratto).
Koehler J.S., On the Dislocation Theory of Plastic Deformation, Physical Review, 60, 397-410.
Prager W., A new mathematical theory of plasticity, Revue Fac. Sci. Istanbul, (A), 5, 215-226.
Prager W., On a analogy between the fundamental equations of hydrodynamics and elastostatics, Revue Fac. Sci. Istanbul, (A), 5, 41-43.
Seth B.R., On Guest's law of elastic failure, Proc. Indian Acad. Sci., (A), 14, 17-40.
Ilyushin A.A., Relations between the theory of Saint-Venant - Lévy - Mises and the theory of small elastic-plastic deformations, Prik. Mat. Mekh., 9, 207-218; vedi anche Appl. Math. and Mech., 9, 1945.
Prager W., Fundamental theorems of a new mathematical theory of plasticity, Duke Math. Jour., 9.
Ilyushin A.A., Some problems on the theory of plastic deformations, Appl. Math. and Mech., 7, 1943.
Meldahl A., Beitrag zur Anwendung der Bruchhypothese der maximalen Gestaltänderungsarbeit, Brown Boveri Mitteilungen, Juli-August 1943, 204.
Sadowsky M.A., A principle of maximum plastic work in classical plasticity, J. Appl. Mech., 65, A-65.
Seth B.R., Consistency equations of finite strain, Proc. Indian Acad., Sci., (A), 29, 336-339.
Udeschini P., Sull'energia di deformazione, Rend. R. Ist. Lom., classe scienze mat. e fis., 76, 25-34.
Sadowsky M.A., On the stress-strain velocity relations in equations of viscous flow, Proc. Ind. Acad. Sci., (A), 20, 329-335.
Thomas T.Y., Surfaces of maximum shearing stress, J. Math. and Phys., 23, 167-172.
Reiner M., A mathematical theory of dilatancy, Amer. Jour., Math., 67, 350-362.
Sokolovsky W.W., Plastic equilibrium equations of a plane stressed state, Appl. Math. and Mech., 9, 127-128.
Sokolovsky W.W., The theory of plasticity. Outline of work done, Appl. Math. and Mech., 9, 507.
Bridgman P.W., The tensile properties of several special steels and certain other materials under pressure, J. Appl. Phys., 17, 201-212.
Bridgman P.W., The effect of hydrostatic pressure on plastic flow under shearing stress, J. Appl. Phys., 17, 692-698.
Gleyzal A., General Stress-Strain Laws of Elasticity and Plasticity, Trans. ASME, 68, A-261 - A-264.
Pastori M., Plasticità, Rend. Sem. Mat. Fis. di Milano, 18 (estratto).
Swift H.W., Plastic strain in isotropic strain-hardening material, Engineering, 162, 381-384.
Volterra E., Sur la relation dynamique entre effort et déformation dans les matériaux plastiques, Congr. Int. Mecc. Appl., ?; cit. in Pastori, 1946.
Torre C., Über den plastischen Körper von Prandtl. Zur Theorie der Mohrschen Grenzkurve, Österreichisches Ingenieur-Archiv, 1, 36-50.
Torre C., Einfluß der mittleren Hauptnormalspannung auf die Fließ- und Bruchgrenze, Österreichisches Ingenieur-Archiv, 1, 316-342.
Weissenberg K., A continuum theory of rheological phenomena, Nature, 159, 310-311.
Hill R., A theory of yielding and plastic flow of anisotropic metals, Proc. Roy. Soc. London, ser. A, 193, 281.
Prager W., Discontinuous solutions in the theory of plasticity, in Studies an Essays presented to R. Courant on his 60 th Birthday, New York, 289-300.
Prager W., Plasticity for the aerodynamicist, J. Aeronautical Sci., 15 (estratto).
Prager W., The stress-strain laws of the mathematical theory of plasticity. A survey of recent progress, Symp. on Flow and Fracture of Metals (estratto).
Reiner M., Elasticity beyond the elastic limit, Amer. J. Math., 70, 433-446.
Richter H., Das isotrope Elastizitätsgesetz, Zeitschrift für angewandte Mathematik und Mechanik, 28, 205-209.
Truesdell C., A new definition of a fluid. I. The stokesian fluid, Proc. 7^Int. Congr. Appl. Mech., 2, 351-364.
Winzer A., Carrier, G.F., The interaction of discontinuity surfaces in plastic field of stress (estratto).
Batdorf S.B., Budiansky B., A mathematical theory of plasticity based on the concept of slip, National Advisory Committee for Aeronautics- Techn. Note, n. 1871.
Colonnetti G., Elastic equilibrium in the presence of permanent set, Quart. Appl. Math., 7, 353-362.
Drucker D.C., Some implications of work hardening and ideal plasticity, Quarterly Appl. Math., 7, 411-418.
Greenberg H.J., Complementary minimum principles for an elastic-plastic material, Quarterly Appl. Math., 7, 85-95.
Leibfried G., Lücke K., Über das Spannungsfeld einer Versetzung, Zeits. für Physik, 126, 450-464.
Mises R. Von, Three remarks on the theory of the ideal plastic body, Reissner Anniversary Volume, Ann Arbor, Michigan, 415-429.
Nadai A.L., Das Fleßen von Metallen unter verschiedenen Beanspruchungen, Österreichisches Ingenieur-Archiv, 3, I Teil, 261-290; II Teil, 421- 445.
Prager W., Recent developments in the mathematical theory of plasticity, J. Appl. Phys., 20, 235-241 (estratto).
Symonds P.S., Elastic-plastic analysis of structures subjected to loads varying arbitrarily between prescribed limits (estratto).
Trifan D., A new theory of plastic flow, Quarterly of Appl. Math., 7, 201-211.
Drucker D.C., White G.N., Effective stress and effective strain relation to stress theories of plasticity, J. Appl. Phys., 21, 1013-1021 (estratto).
Freudenthal A.M., Inelastic behavior of engineering materials and structures, New York.
Nadai A., Theory of flow and fracture of solids , McGraw-Hill, New York, 1950.
Neal B.G., Plastic collapse and shakedown theorems for struc-tures of strain-hardening material, J. Aeronautical Sci., 5 (estratto).
Oldroyd J.G., On the formulation of rheological equations of state, Proc. Roy. Soc., (A), 200, 523-541.
Signorini A., Un semplice esempio di “incompatibilità” tra l'elastostatica classica e la teoria delle deformazioni elastiche finite, Rend. Accad. Lincei, cl. mat. fis., 8, 276-281.
Stüssi F., Die Grundlagen der mathematischen Plastizitätstheorie und der Versuch, Zeitschrift für angewandte Mathematik und Physik, 1, 254-267.
Torre C., Die Mechanik der Grenzbeanspruchungen, Österreichisches Ingenieur-Archiv, 4, 93-108.
Torre C., Grenzbedingung für spröden Bruch und plastisches Verhalten bildsamer Metalle, Österreichisches Ingenieur-Archiv, 4, 174-189.
Bijlaard P.P., Die Grundlagen der mathematischen Plastizitätstheorie und der Versuch, Zeitschrift für angewandte Mathematik und Physik, 2, 114-117.
Drucker D.C., Edelman F., Some extension of elementary plasticity theory, J. Franklin Inst., 251, 580-605.
Hill R., On the state of stress in a plastic-rigid body at the yield point, Phil. Mag., 42, 868-875.
Leibfried G., Dietze H.-D., Versetzungsstrukturen in kubisch-flächenzentrierten Kristallen, Zeits. für Physik, 131, Teil I: 113-129; Teil II: 156-169.
Ono A., Strength of materials and practical problems, Proc. of the 1^Japan National Congres for Applied Mechanics, 1-4.
Prager W., Hodge P.G., Perfectly elastic solids, New York.
Prager W., Recent contributions to the theory of plasticity, Appl. Mech. Rew., 585-588 (estratto).
Stüssi F., Stellungnahme zur Zuschrift von Prof. P.P. Bijlaard, Zeitschrift für angewandte Mathematik und Physik, 2, 118-119.
Whittaker E., A History of the Theories of Aether and Electricity, Nelson and Sons, London; ed. orig., meno ampia,1910.
Yamamoto Y., A general theory on the plastic behavior of metals, Proc. of the 1^Japan National Congress for Applied Mechanics, 93-96.
Yokobori T., The fatigue of metals from the standpoint of the nucleation theory, Proc. of the 1^Japan National Congress for Applied Mechanics, 97-100.
Bridgman P.W., Studies in large plastic flow and fracture, with special emphasis on the effects of hydrostatic pressure, Harvard Univ. Press, 1964 (ed. orig. 1952).
Hill R., A note on estimating yield point loads in a plastic-rigid body, Phil. Mag., 43, 353-355.
Isa T., On plastic deformation, Proc. of the 2^Japan National Congress for Applied Mechanics, 49-50.
Kondo K., On the geometrical and physical foundations of the theory of yielding, Proc. of the 2^Japan National Congress for Applied Mechanics, 41-47.
Thomas T.Y., On the characteristic surfaces of the von Mises plasticity equations, Jour. Rat. Mech. An., 1, 343-357.
Truesdell C., A Program of Physical Research in Classical Mechanics, Zeitschrift für angewandte Mathematik und Physik, 3, 79-95.
Truesdell C., The mechanical foundations of elasticity and fluid dynamics, Jour. Rat. Mech. An., 1, 125-300.
Cottrel A.H., Dislocation and plastic flow in crystals, Oxford.
Koiter W.T., Stress-strain relations, uniqueness and variational theorems for elastic-plastic material with a singular yield surface, Quart. Appl. Math., 11, 29-53.
Lee E.H., A boundary value problem in the theory of plastic wave propagation, Quart. Appl. Math., 10 (estratto).
Nye J.F., Some geometrical relations in dislocated crystals, Acta Metallurgica, 1, 153-162.
Prager W., On the use of singular yield conditions and associated flow rules, J. Appl. Mech., 20, 317-320.
Sautter W., Kochendörfer A., Dehlinger U., Über die Gesetzmäßigkeiten der plastischen Verformung von Metallen unter einem mehrachsigen Spannungszustand (Dissertation von W. Sautter, TH Stuttgart 1952), Zeitschr. für Metallkunde, 44, I Teil.Theoretische Grundlagen: pp. 442-449; II Teil. Zug- und Torsionsversuche an Hohlzylindern aus Aluminium: pp. 553-565.
Stassi D'alia F., Origini e sviluppi delle teorie sulla plasticità, Atti Acc. Sci. lett. Arti Palermo, 14, 45-102 (1953-'54).
Timoshenko S., History of strength of materials, New York, 1983.
Noll W., On the continuity of the solid and fluid state, Jour. Rat. Mech. An., 4, 3-81.
Olszak W., The plane problem of the theory of plastic flow of non-homogeneous bodies, Bull. Acad. Polonaise Sci., 4, 119-124.
Truesdell C., Hypo-elasticity, Jour. Rat. Mech. An., 4, 83-133.
Truesdell C., The simplest rate theory of pure elasticity, Comm. on Pure and Appl. Math., 8, 123-132.
Biot M.A., Theory of deformation of a porous viscoelastic anisotropic solid, J. Appl. Phys., 27, 459-467.
Burgers J.M., Burgers W.G., Dislocations in crystals lattices, in Rheology, Eirich F.R., (Ed.), Cap. VI, New York.
Finzi L., Legame fra equilibrio e congruenza e suo significato fisico, Rend. Acc. Lincei, 20, 205-211; 338-342.
Hill R., New Horizons in the mechanics of solids, J. Mech. and Phys. of Solids, 5, 66-74.
Hodge P.G. (Jr.), A general theory of piecewise linear plasticity based on maximum shear, J. Mech. and Phys. of Solids, 5, 243-260, (1956-'57).
Lianis G., Ford H., An experimental investigation of the yield criterion and the stress-strain law, J. Mech. and Phys. of Solids, 5, 215-222.
Olszak W., Urbanowski W., The plastic potential and the generalized distortion energy in the theory of non-homogeneous anisotropic elastic-plastic bodies, Archiwum Mechaniki Stosowanej, 8, 671-694.
Prager W., Finite plastic deformation, in Rheology, Eirich, F.R., (Ed.), cap. III, New York.
Reiner M., Phenomenological Macrorheology, in Rheology, Eirich, F.R., (Ed.), cap. II, New York.
Thomas T.Y., Deformation energy and stress-strain relations for isotropic materials, J. Math. and Phys., 35, 335-350.
Trifan D., Stress theory of plastic flow, J. Math. and Phys., 35, 44-52.
Truesdell C., Das ungelöste Hauptproblem der endlichen Elastizitäts-theorie, Zeitschrift für angewandte Mathematik und Mechanik, 36, 97-103.
Truesdell C., Hypo-elastic shear, J. Appl. Phys., 27; pp. 441-447.
Truesdell C., Zur Geschichte des Begriffes “innere Druck”, Phys. Blätter, 12, 315-326.
Verma P.D.S., Hypo-elastic pure flexure, Proc. Indian Acad. Sci., (A), 44, 185-193.
Olszak W., Urbanowski W., The generalised distortion energy in the theory of anisotropic bodies, Bull. Acad. Polonaise Sci., 4, 29-37.
Olszak W., Urbanowski W., The tensor of moduli of plasticity, Bull. Acad. Polonaise Sci., 4, 39-45.
Olszak W., Urbanowski W., The flow function and the yield condition for non-homogeneous orthotropic bodies, Bull. Acad. Polonaise Sci., 4, 191-203.
Truesdell C., Ipoelasticità, Bari.
Ericksen J.L., Hypo-elastic potentials, Quart. J. Mech. and Appl. Mech., 11, 67-72.
Geiringer H., Ideal Plasticity, Handb. der Phys., VIa/3.
Kondo K., Yuki M., On the Current Viewpoints of Non-Riemannian Theory, in RAAG Memoirs, 2, 202-226.
Kondo K., Uncertainty Elements in the Theory of Plasticity Phenomena, RAAG Memoirs, 2, 227-232.
Lin T.H., On stress-strain relations based on slips, Proc. 3^ U.S. Nat. Congr. Appl. Mech., 581-587.
Stassi D'alia F., Teoria della plasticità e sue applicazioni, Palermo.
Budiansky B., A reassessment of deformation theories of plasticity, Trans. ASME, E26, 259-264.
Clavuot C., Ziegler H., Über einige Verfestigungsregeln, Ing.-Arch., 28, 13-26.
Kröner E., Allgemeine Kontinuumstheorie der Versetzungen und Eigenspannungen, Arch. Rat. Mech. An., 4, 273-333.
Pipkin A.C., Rivlin R.S., The formulation of constitutive equations in continuum physics. I, Arch. Rat. Mech. An., 4, 129-144.
Rivlin R.S., The formulation of constitutive equations in continuum physics, II, Arch. Rat. Mech. An., 4, 262-272.
Truesdell C., The rational mechanics of materials. Past, Present, Future, Appl. Mech. Rev., 12, 75-80.
Bernstein B., Hypoelasticity and elasticity, Arch. Rat. Mech. An., 6, 89-104.
Drucker D.C., Extension of the stability postulate with emphasis on temperature changes, Plasticity. Proc. 2^Symp. on Naval Structural Mechanics, 170-184.
Hu L.W., Plastic stress-strain relations and hydrostatic stress, Plasticity. Proc. 2^Symp. on Naval Structural Mechanics, 194-201.
Kröner E., General continuum theory of dislocations and initial stress, Arch. Rat. Mech. An., 4, 273-334.
Naghdi P.M., Stress-strain relations in plasticity and thermoplasticity, Plasticity. Proc. 2^Symp. on Naval Structural Mechanics, 121-167.
Truesdell C., The rational mechanics of flexible or elastic bodies (1638-1788), in L.Eulerii Opera Omnia, (2), 11/2, Zürich.
Truesdell C., A program toward rediscovering the rational mechanics of the age of reason, Arch.Hist.Ex.Sci., 1, 3-36.
Truesdell C., Modern theories of materials, Trans. Soc. Rheol., 4, 9-22.
Wegner U., Allgemeine Elastizitätsgesetze, Der Stahlbau, 29, 265-268.
Coleman B.D., Noll W., Foundations of linear visco-elasticity, Reviews modern Phys., 33, 239-249.
Kröner E., Zur plastischen Verformung des Vielkristalls, Acta Metallurgica, 9, 155-161.
Phillips A., Gray G.A., Experimental investigation of conrners in the yield surface, Journ. bas. Engng., 83, 275.
Prager W., Einführung in die Kontinuumsmechanik, Basel-Stüttgart.
Thomas T.Y., Plastic flow and fracture in solids, Academic Press, New York.
Wegner U., Allgemeine Elastizitätsgesetze, Der Stahlbau, 30, 321-328.
Drucker D.C., Survey on second-order plasticity, Proc. Symp. "Second-order effects in elasticity, plasticity and fluid dynamics”, Haifa, 416-423.
Drucker D.C., Stress-strain-time relations and irreversible thermodynamics, Proc. Symp. "Second-order effects in elasticity...”, Haifa, 351-350.
Drucker D.C., On the role of experiment in the development of theory, Proc. 4^U.S. Nat. Congr. Appl. Mech., 1, 15-33.
Yoshimura Y., Takenaka Y., Strain history effects in plastic deformation of metals, Proc. Symp. "Second-order effects in elasticity...", Haifa, 729-750.
Kröner E., Dislocations and Continuum Mechanics, Appl. Mech. Rev., 15, 599-606.
Nemenyi P.F., The main concepts and ideas of fluid dynamics in their historical development, Arch.Hist.Ex.Sci., 2, 52-86; (1962-'66).
Truesdell C., Rückwirkungen der Geschichte der Mechanik auf Die moderne Forschung, Humanismus und Technik, 13, 1-25; tradotto da Essays in the History of Mechanics, Springer 1968 (il lavoro originale risale al 1962: cfr. Proc. 4^U.S. Nat. Congr. Appl Mech., 35-47).
Truesdell C., Second-order effects in the mechanics of materials, Proc. Symp. "Second-order effects in elasticity...", Haifa , 1-47.
Eringen A.C., An international journal of engineering science, Int. J. Engng Sci., 1, 1-3.
Finzi B.D., Simple liquid crystals, Arch. Rat. Mech. An., 20, 40.
Courbon J., Résistance des Matériaux, Dunod, Paris.
Craggs J.W., The use of first order differential equations as constitutive equations in the theory of plasticity, Int. J. Engng Sci., 3, 9-19.
Green A.E., Naghdi P.M., A comment on Drucker's postulate in the theory of plasticity, Acta Mechanica, 1, 334-338.
Green A.E., Naghdi P.M., A general theory of an elastic-plastic continuum, Arch. Rat. Mech. An., 18, 251-281; corrigenda in 19.
Leipholz H., Über den Zusammenhang zwischen Fliessgesetz und Fliessbedingung, Ing.-Arch., 34, 194-197.
Mandel J., Généralisation de la théorie de plasticité de Koiter, Int. J. Solids and Structures, 1, 273-295.
Phillips A., Sierakowski R.L., On the concept of the yield surface, Acta Mechanica, 1, 29-35.
Pipkin A.C., Rivlin S., Mechanics of Rate-Independent Materials, ZAMP, 16, 313-327.
Truesdell C., Noll W., The non-linear field theories of mechanics, in Handbuch der Physik, III/3.
Wang C.-C., A general theory of subfluids, Arch. Rat. Mech. An., 20, 1.
Green A.E., Naghdi P.M., A thermodynamical development of elastic-plastic continua, Proc. IUTAM Symp. "Irreversible aspects of continuum mechanics and transfer of physical characteristics in moving fluids”, Vienna, 117-131.
Justusson J.W., Phillips A., Stability and Convexity in Plasticity, Acta Mechanica, 2, 251-267.
Lin T.H., Ito M., Theoretical plastic stress-strain relationship of a polycrystal and the comparisons with the von Mises and the Tresca plasticity theories, Int. J. Engin. Sci., 4, 543-561.
Morgan A.J.A., Some properties of media defined by constitutive equations in implicit form, Int. J. Engng Sci., 4, 155-178.
Thomas A.G., Physical Basis of Yield and Fracture, Conf. Proc. Oxford, Institute of Physics, London, 134-?; cit. in IUTAM, 1982, “Finite Elasticity”.
Truesdell C., Six Lectures on Modern Natural Philosophy, Springer.
Uhlhorn U., Thermomechanics of a continuous system with internal structure, Proc. IUTAM Symp. "Irreversible aspects...", Vienna, 390-393.
Varley E., Day A., Equilibrium Phases of Elastic Materials at Uniform Temperature and Pressure, Arch. Rat. Mech. An., 22, 253-269.
Capurso M., Yield conditions for incompressible isotropic and orthotropic materials with different yield stress in tension and compression, Meccanica, 2, 118-125.
Dillon O.W., A thermodynamic basis of plasticity, Acta Mechanica, 3, 182-195.
Le Boiteux H., Sur un critère énérgetique de limite élastique, Comptes Rendus, 265, (A), 238-239.
Mair W.M., An investigation into the existence of corners on the yield surface, J. of Strain Analysis, 2, 188-195.
Reckling K.-A., Plastizitätstheorie und ihre Anwendung auf Festigkeitsprobleme, Springer.
Spencer B.J., Boscovich's theory and its relation to Faraday's researches: an analytic approach, Arch.Hist.Ex.Sci., 4, 184-202.
Ziegler H., Mc Vean D., On the notion of an elastic solid, Recent Progress in Appl. Mech., F.Odquist Volume, Stoccolma.
Benvenuto E., Corsanego A., Formulazione duale di un criterio di stabilità dell'equilibrio, Atti Ist. Sci. Costr. Genova, 3, 19-26.
Lehmann T., Thermann K., Grundlagen der Plastizitätstheorie und ihre Anwendungen, VDI-Zeits., 110, 1491-1499.
Odqvist F.K.G., Non-linear solid mechanics, past, present and future, Proc. 12^ Int. Congr. Appl. Mech., 77-99.
Shoemaker E.M., Some paradoxes associated with elastic-plastic limit load analysis, Archiwum Mechaniki Stosowanej, 20, 473-482.
Truesdell C., Essays in the History of Mechanics, Springer, New York.
Augusti G., Martin J.B., Prager W., On the decomposition of stress and strain tensors into spherical and deviatoric parts, Proc. Nat. Acad. Sci., 63, 239-288.
Beatty M.F., A Theory of Elastic Stability for Perfectly Elastic Materials with Couple-stresses, Proc. IUTAM "Instability of continuous Systems”, 85-89.
Christoffersen J., Equilibrium and Stability of Elastic-plastic Bodies, Proc. IUTAM "Instability of continuous Systems”, 317-328.
Fox N., On the derivation of the constitutive equations of ideal plasticity, Acta Mech., 7, 248-251.
Kondo K., On the Riemannian and Non-Riemannian Constructions of the Variational Criteria for Plastic Disturbances and the Standpoint of the Theory of Yielding and Dual Yielding, Jour. of the Faculty of Engineering, University of Tokyo (B), 30, n. 2, 73-1.
Moraru D., Essai sur une theorie thermodynamique des processus irreversibles de deformation, Atti Ist. Sci. Costr. Genova, 3, 1-18.
Morris G.A., Fenves S.J., Approximate yield surface equations, Jour. engineering mechanics division (Proc. ASCE), August 1969, pp. 937-954.
Storakers B., Stability Conditions of Rigid-plastic Solids with Extension to Visco-plasticity, Proc. IUTAM "Instability of continuous Systems,” 266-271.
Drucker D.C., Rice J.R., Plastic deformation in brittle and ductile fracture, Engineering Fracture Mechanics, 1, 577-602.
Hill R., Constitutive inequalities for isotropic elastic solids under finite strain, Proc. Roy. Soc. London, (A), 314, 457.
Owen D.R., A Mechanical Theory of Materials with Elastic Range, Arch. Rat. Mech. An., 37, 85-110.
Sayir M., Zur Fliessbendingung der Plastizitätstheorie, Ing.-Arch., 39, 414-432.
Valanis K.C., On the thermodynamical foundation of classical plasticity, Acta Mech., 9, 278.
Capurso M., Sacchi G., Una condizione di plasticità per solidi anisotropi, 1^Congr. AIMETA, 2, Udine, 339-355.
Cattaneo C., Saggio di una teoria relativistica dell'elasticità, 1^Congr. AIMETA, 1, Udine, 173-219.
Eisenberg M.A., Phillips A., A Theory of Plasticity with Non-Coincident Yield and Loading Surfaces, Acta Mechanica, 11, 247-260.
Hahn H.G., Die linear-elastische Bruchmechanik, VDI-Zeits., 113, 43-47.
Kondo K., Reconstruction of the theory of Yielding with Special Reference to its Crucial Points and its Relation to the Theory of Cosserat Continua, RAAG Research Notes, III ser. n. 168, 1-63.
Kondo K., A Compendium of the Foundation of the Theory of Yielding in Terms of an Osculation Picture of Finsler Space, Post-RAAG Research Notes and Memoranda, n. 22, 1-12.
Lehmann T., Thermann K., Grundlagender Plastizitätstheorie und ihrer Anwendungen, VDI-Zeits., 113, 1169-1183.
Valanis K.C., A theory of viscoplasticity without a yield surface, Archives of Mechanics, 23; parte I, 'General Theory': pp. 517-533; parte II, 'Application to mechanical behavior of metals': pp. 535-551.
Andreussi F., Podio Guidugli P., An axiomatic approach to the theory of themomechanically constrained materials, Plasticity today, 359-364.
Baldacci R., Capurro M., Daddi I., A glance forward in solid mechanics, Atti Ist. Sci. Costr. Genova, 5, ?; 1971-'72.
Bell J., The experimental foundations of solid mechanics, H.d.P., VIa/1.
Berezhnoi I.A., Ivlev D.D., Tchadov V.B., On constructing models of cohesionless media by specifying the dissipation function, Foundations of Plasticity (Varsavia 1972), 601-605.
Berg C.A., Construction of the equivalent plastic strain increment, Studies in Applied Mathematics, 51, 311-316.
Betten J., Eine Bemerkung zum Potentialbegriff in der Plasto-mechanik, Arch. für das Eisenhüttenwesen, 43, 471-473.
Fung P.K., Burns D.J., Lind N.C., Yield under high hydrostatic pressure, Foundations of Plasticity (Varsavia 1972), 287-299.
Hecker S.S., Experimental investigation of corners in the yield surface, Acta Mechanica, 13, 69-86.
König J.A., On shakedown criteria, Plasticity today, 408-412.
Nikolaevskii V.N., Continuum theory of plastic deformation of granular media, Foundations of Plasticity (Varsavia 1972), 587-600.
Noll W., A New Mathematical Theory of Simple Materials, (Dedicated to Clifford Truesdell, friend and mentor of the author), Arch. Rat. Mech. An., 48, 1-50.
Philips A., Experimental plasticity. Some thoughts on its present status and possible future trends, Plasticity today, 193-231.
Prager W., Limit analysis: the development of a concept, Problems of Plasticity (Varsavia 1972), 3-24.
Seth B.R., Elastic-plastic transition, Plasticity today, 440-443.
Valanis K.C., Irreversible thermodynamic of continuous media, Springer.
Valanis K.C., Observed plastic behavior of metals vis-a-vis the endochronic theory of plasticity, Foundations of Plasticity (Varsavia 1972), 235-255.
Bell J. F., The experimental foundations of solid mechanics, Handbuch der Physik, 6a/I, Festkörpermechanik I, Springer.
Green A.E., Naghdi P.M., Rate-type constitutive equations and elastic-plastic materials, Int. J. Engng Sci., 11, 725-734.
Maier G., Drucker D.C., Effects of Geometry Change on Essential Features of Inelastic Behavior, Jour. of the engineering mechanics division, (Proc. ASCE), August 1973, pp. 819-834.
Maitra M., Majumdar K., Unified plastic yield criterion for ductile solids, AIAA J. (American Inst. Aeronautics and Astronautics), 11, 1428-1429.
Shrivastava H.P., Mroz Z., Dubey R.N., Yield criterion and second-order effects in plane-stress, Acta Mechanica, 17, 137-143.
Zyczkowski M., On the accuracy of approximations of the Huber yield condition, Archives of Mechanics (Archiwum Mechaniki Stosowanej), 26, 65-79.
Baldacci R., Capurro M., Daddi I., Il microuniverso delle dislocazioni, II Congr. AIMETA, Napoli.
Baldacci R., Ceradini G., Giangreco E., Plasticità, Cisia.
Cowin S.C., Constitutive relations that imply a generalized Mohr-Coulomb criterion, Acta Mech., 20, 41-46.
Kleiber M., Objective formulation of rate-type constitutive equations for elastic-ideally plastic solids, Bull. Acad. Polonaise Sci., 22, 37-42.
Larsen P.K., Popov E.P., A note on incremental equilibrium equations and approximate constitutive relations in large inelastic deformations, Acta Mech., 19, 1-14.
Ogden R.W., On isotropic tensors and elastic moduli, Proc. of the Cambridge Phil. Soc., 75, 427-436.
Phillips A., Tang J.-L., Ricciuti M., Some new observations on yield surfaces, Acta Mech., 20, 23-39.
Reiner M., Takserman-Krozer R., Second order stresses in classical elasticity, Acta Mech., 19, 305-308.
Szabo I., Die Geschichte der Materialkonstanten der linearen Elastizitäts-theorie homogener isotroper Stoffe, Die Bautechnik, 51, 1-8.
Tokuoka T., Three-dimensional failure of isotropic materials with memory, Acta Mech., 19, 289-295.
Del Piero G., On a mathematical theory of elastic-plastic materials, Archives of Mechanics (Archiwum Mech. Stosow.), 27, 253-271.
Hill R., On the elasticity of stability of perfect crystals at finite strain, Math. Proc. Cambridge Phil. Soc., 77, 225-240.
Martin J.B., Plasticity: Fundamentals and General Results, London.
Llorens R.E., A hyperbolic theory of plasticity, Int. J. Non-Linear Mech., 11, 285-294.
Michno M.J., Findley W.N., An historical perspective of yield surface investigation for metals, Int. J., Non-Linear Mech., 11, 59-82.
Silhavy M., On Transformation Laws for Plastic Deformations of Materials with Elastic Range, ARMA, 63, 1976/77, 169-182.
Truesdell C., History of Classical Mechanics, Die Naturwissenschaften, 63; Part I, to 1800: pp. 53-62; Part II, the 19th and 20th Centuries: pp. 119-130.
Capurro M., Per una interpretazione strutturale della teoria della plasticità, pubbl. 18, ser. IV, Univ. Genova, Ist. Sci. Costruz.
Iannelli V., Vivanet C., Random elastoplastic continua subjected to hydrostatic pressure, AIMETA, Firenze, 2, 297-311.
Mandel J., Propriétés mécaniques des matériaux. Rhéologie-Plasticité, Paris
Augusti V., Baldacci R., Capurro M., A micro-relativistic dislocation theory, Mem. Acc. Naz. Lincei, sez. VIII, 15.
Bell J.F., A Physical Basis for Continuum Theories of Finite Strain Plasticity: Part I, (Dedicated to Clifford Truesdell on his sixtieth birthday), ARMA, 70, 319-338.
Fosdick R.L., Serrin J., On the impossibility of linear Cauchy and Piola-Kirchhoff constitutive theories for stress in solids, Journal of Elasticity, 9, 83-89.
Irvine H.M., The stability of the roman arch, Int. J. Sci., 21, 467-475.
Martins L.C., Podio-Guidugli P., A variational approach to the polar decomposition theorem, Rendiconti Acc. Lincei, cl. sci. fis. mat. nat., 66, sez. 1, 487-493.
Massonet C., Olszak W., Phillips A., Plasticity in structural engineering. Fundamentals and Applications, Springer-Verlag, Wien-New York.
Baldacci R., Plasticità fenomenologica e strutturale, in Memorie Scientifiche di R.Baldacci, 437-453.
Bell J.F., A Physical Basis for Continuum Theories of Finite Strain Plasticity: Part II, Arch. Rat. Mech. An., 75, 103-126.
Bergander H., Plastische Deformationsgesetze in differentieller Standardformulierung, Zeitschrift für angewandte Mathematik und Mechanik, 60, 509-519.
Capurro M., I mezzi continui e il loro controllo fisico, 5^Congr. AIMETA, Palermo, 57-67.
Hopkins H.G., Prof. William Prager (23 May 1903 - 17 March 1980). Obituary, Int. J. Mech. Sci., 22, 393-394.
Hutchinson J.W., Neale K.W., Finite Strain J2 deformation theory, Proc. IUTAM Symp. "On finite elasticity", USA, 237-247.
Shaw M.C., A new mechanism of plastic flow, Int. J. Mech. Sci., 22, 673-686.
Truesdell C., Sketch for a history of constitutive relations, Proc. Int. Congr. Rheology (Naples, Sept. 1-5, 1980), 1 , 1-27.
Zaslavski A., On the limitations of the shearing stress formula, Int. J. Mechanical Engng Education, 8, 343-349.
Bell J.F., Continuum Plasticity at Finite Strain for Stress Paths of Arbitrary Composition and Direction, Arch. Rat. Mech. An., 84, 139-170.
Heyman J., The development of plastic theory 1936-1948: some notes for a historical sketch, in Instability..., Proc. of the M.R.Horne Conf., 1-18.
Morris L.J. (Ed.), Instability and plastic collapse of steel structures, Proc. of the M.R.Horne Conference, Ed. Granada.
Valanis K.C., Fan J., Experimental verification of endochronic plasticity in spatially varying strain fields, Plasticity today, 153-174.
Zaoui A., Macroscopic plastic behaviour of microinhomogeneous materials, Plasticity today, 451-469.
Fichera G., The italian contribution to the mathematical theory of elasticity, Meccanica, 19, 259-268.
Ceradini G., Sviluppi ed implicazioni strutturali della teoria della plasticità, AIMETA, Trieste, dattiloscritto.
Sawczuk A., Bianchi G. (Eds.), Plasticity today, Elsevier, London.
Di Pasquale S., Questioni concernenti la meccanica delle murature. Storia e prospettive, in AAVV, Architettura e terremoti. Il caso di Parma; 9 novembre 1983, Bologna.
Kröner E., The continuized crystal. A bridge between micro- and macromechanics?, Zeitschrift für angewandte Mathematik und Mechanik, 66, T 284-T292.
Chakrabarty J., Theory of plasticity, New York.
Lehmann T., Phänomenologische Plastizitätstheorie, ihre Grundlagen und Methoden, Naturwissenschaften, 74, 225-234.
Neale K.W., Plastic instability phenomena and material formability, Developments in Engineering Mechanics (Ed. A.P.S. Selvadurai) Elsevier, Amsterdam, 159-167.
Truesdell C., Great scientists of old as heretics in "The scientific method", Univ. Press Virginia.
Casey J., Naghdi P.M., On the Relationship between the Eulerian and Lagrangian Descriptions of Finite Rigid Plasticity, Arch. Rat. Mech. An., 102, 351-375.
Charrier P., Dacorogna B., Hanouzet B., Laborde P., An existence theorem for slightly compressible materials in nonlinear elasticity, SIAM Journ. Mathematical Analysis, 19, 70-85.
Chipot M., Kinderlehrer D., Equilibrium Configurations of Crystals, Arch. Rat. Mech. An., 103, 237-277.
Lucchesi M., Podio-Guidugli P., Materials with Elastic Range: A Theory with a View toward Applications. Part I, Arch. Rat. Mech. An., 102, 23-43.
Lucchesi M., Podio-Guidugli P., Sull'equivalenza di alcuni postulati di dissipazione in teoria classica della plasticità, Atti congr. AIMETA 1988, 121-124.
Podio-Guidugli P., Il criterio di snervamento della sottoenergia, in Omaggio a G.Ceradini, Univ. Roma “La Sapienza”, 559-568.
Dahan Dalmedico A., La notion de pression: de la méta-physique aux diverses mathématisations. Causalité et statut des Hypothèses, Revue Hist. Sci., 42, 79-108.
Lagoudas D.C., A gauge theory of defects in media with microstructure, Int. J. Engng Sci., 27, 237-249.
Paglietti A., Thermodynamic nature and control of the elastic limit in solids, Int. J. Non-Linear Mech., 24, 571-583.
Grattan-Guinness I., Convolutions in French Mathematics, 1800-1840. From the Calculus and Mechanics to Mathematical Analysis and Mathematical Physics, Basel-Boston-Berlin.
Kröner E., The differential geometry of elementary point and line defects in Bravais crystals, Int. J. Theor. Phys., 29, 1219-1237.
Kröner E., Threedimensional stress functions in anisotropic elasticity, Rend. di Mat., serie VII, 10, 773-784.
Lubliner J., Plasticity theory, MacMillan, New York.
Lucchesi M., Podio-Guidugli P., Equivalent Dissipation Postulates in Classical Plasticity, Meccanica, 25, 26-31.
Bell J.F., The late-twentieth century resolution of a mid-nine-teenth century dilemma generated by the eighteenth-century experiments of Ernst Chladni on the dynamics of rods, Arch.Hist.Ex.Sci., 43, 259-273.
Lucchesi M., Silhavy M., Ilyushin's Conditions in Non-Isothermal Plasticity, Arch. Rat. Mech. An., 113, 121-163.
Podio-Guidugli P., Vergara Caffarelli G., Extreme Elastic Deformations, Arch. Rat. Mech. An., 115, 311-328.
Angeli P., Paglietti A., Superficie plastica alla von Mises: la sola possibile per materiali elastici lineari, Atti IX Congr. AIMETA, 23-28.
Casey J., The principle of rigidification, Arch.Hist.Ex.Sci., 43, 329-383.
Crosland M., Science under Control. The French Academy of Sciences. 1795-1914, Cambridge.
Dahan Dalmedico A., Mathématisations. A.-L. Cauchy et l’École Française, Paris.
Paglietti A., Porcu M.C., Stabilità dei materiali elasto-plastici al limite elastico. Aspetti geometrici, Atti IX Congr. AIMETA, 437-442.
Podio-Guidugli P., Gurtin E., On the formulation of mechanical balance laws for structured continua, Zeitschrift für angewandte Mathematik und Physik, 43, 181-190.
Rencontre L.J., Bird W.W., Martin J.B., Internal variable formulation of a backward difference corrector algorithm for piecewise linear yield surfaces, Meccanica, 27, 13-24.
Truesdell C., Cauchy and the modern mechanics of continua, Revue Hist. Sci., 45, 5-24.
Kröner E., Theory of crystal defects and their impact on material behaviour, in Modelling of defects and fracture mechanics (G. Herrmann, Editor), Springer Verlag, New York, 62-117.
Martin J.B., Reddy B.D., Piecewise smooth dissipation and yield functions in plasticity, Meccanica, 28, 169-175.